Skip to product information
1 of 1


Lyra Kleos SL Low Output MC Cartridge

Lyra Kleos SL Low Output MC Cartridge

BUY WITH CONFIDENCE We are a 2 x Global Award Winning Retailer
Read More
FREE 5 YEAR WARRANTY INCLUDED FREE 5 year warranty included on this item
Regular price £3,095.00
Regular price Sale price £3,095.00
Sale Sold out
VAT included.

Part Exchange / Trade In Quote?

This is a special, built-to-order, version of Kleos for expert users with very high-gain, extra low noise phono stages, or alternatively a step-up transformer designed for phono cartridges of 2 - 3 ohms or less.
Most users (and phono stages) will benefit from the regular Kleos with much higher output and considerably more energy; resulting in a much better signal-to-noise ratio. If you are in doubt about which version of Kleos that will work best in your system, please go with the regular Kleos.
The Kleos SL may provide extra pure and pristine sound from an audio system that is optimized for a low-impedance, low-output cartridge. However, this may be accompanied with a lesser level of energy and power.
Lyra nevertheless has decided to offer SL models, as built-to-order at a 10% surcharge, for those who are confident that they can extract the benefits from such a low-output MC phono cartridge.

 Designer: Jonathan Carr
 Builder: Yoshinori Mishima (final build, testing), Akiko Ishiyama (preliminary build)
 Type: Medium weight, medium compliance, low-impedance, low-output moving coil cartridge
 Stylus: Lyra-designed long-footprint variable-radius line-contact nude diamond (3um x 70um profile, block dimensions 0.08 x 0.12 x 0.5mm), slot-mounted
 Cantilever system: Solid boron rod with short one-point wire suspension, directly mounted into cartridge body
 Coils: Single layer, 6N high-purity copper, square-shaped chemically-purified high-purity iron former, 2.7ohms self-impedance
 Output voltage: 0.25mV@5cm/sec., zero to peak, 45 degrees (CBS test record, other test records may alter results)
 Frequency range: 10Hz ~ 50kHz
 Channel separation: 35dB or better at 1kHz
 Compliance: Approx. 12x10-6cm/dyne at 100Hz
 Vertical tracking angle: 20 degrees




 Cartridge body: One-piece machining from solid 7075 alloy billet, with reduced-surface higher-pressure headshell contact area, partially non-parallel shaping, phase-interference resonance-controlling mechanism, and body threaded directly for mounting screws
 Cartridge mounting screws: 2.6mm 0.45 pitch JIS standard
 Distance from mounting holes to stylus tip: 9.5mm
 Cartridge weight (without stylus cover): 8.8g
 Recommended tracking force: 1.65 ~ 1.78g (1.72g recommended)
 Recommended load directly into MC phono input: Determine by listening,
 Recommended load via step-up transformer: Use a step-up transformer designed for 2 - 3 ohms cartridge impedance. The transformer output must be connected to standard 47kohm MM-level RIAA input, preferably via short, low-capacitance cable
 Recommended tonearms: High-quality pivoted or linear tangential tonearms with rigid bearing(s), adjustable anti-skating force, preferably VTA

View full details

Buy with Confidence

OVER 10,000 happy customers