Audio Technica VM510CB MM Cartridge
Audio Technica VM510CB MM Cartridge
Part Exchange / Trade In Quote?
Part Exchange / Trade In Quote?
- Conical Bonded stylus
- VM type dual magnet system
- Para-toroidal coils improve generating efficiency
- Aluminium cantilever
- Centre shield plate between stereo channels
- Durable low resonance polymer housing
Entry-level VM cartridge model equipped with a conical bonded stylus. The round stylus is less likely to be affected by placement and boasts stable tracing performance.
- Aluminium cantilever
- Para-toroidal coils improve generating efficiency
- Centre shield plate between the left and right channels reduces crosstalk
- Durable low resonance polymer housing
Features
AUDIO-TECHNICA’S INTERNATIONALLY-PATENTED DUAL MAGNET DESIGN REPLICATES THE STRUCTURE OF THE CUTTER HEAD.
Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.
Para-toroidal generating system
Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.
Centre shield plate reduces crosstalk
A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.
500 SERIES
Standard cartridge body fitted with the para-toroidal coils, centre shield plate, and 6N-OFC coil wire which is the same as 700 series.
CONICAL BONDED STYLUS
The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely. Due to its stability, it has been used widely at radio stations.
Video
Specs
Type | VM Type |
Mounting | 1/2” centres |
Frequency Response | 20 - 20,000Hz |
Channel Separation | 25dB (1kHz) |
Output Channel Balance | 1.5dB (1kHz) |
Output Voltage | 5.0mV (1kHz, 5cm/sec.) |
Vertical Tracking Angle | 23˚ |
Vertical Tracking Force Range | 1.8 – 2.2g (2.0g standard) |
Stylus Shape | Conical Bonded |
Stylus Size | 0.6 mil |
Stylus Construction | Bonded Round Shank |
Cantilever | Aluminium Pipe |
Coil Impedance | 2,700Ω (1kHz) |
Static Compliance | 35 x 10-6 cm/dyne |
Dynamic Compliance | 8 x 10-6 cm/dyne (100Hz) |
Recommended Load Impedance | 47,000Ω |
Recommended Load Capacitance | 100 – 200pF |
Weight | 6.4g |
Dimensions | 17.3 (H) x 17.0 (W) x 28.2 (L) mm |
Replacement Stylus | VMN10CB |
Accessories Included | Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2 |
Share
Buy with Confidence
OVER 10,000 happy customers