Audio Technica AT-VM95ML MM Cartridge
Audio Technica AT-VM95ML MM Cartridge
Part Exchange / Trade In Quote?
Part Exchange / Trade In Quote?
Availability: In Stock (Same Day Despatch)
The AT-VM95ML, features a Nude Microlinear diamond, not only the Microlinear stylus will permit to double the duration of your stylus. The performance of a line contact stylus, will minimize the “inner groove distortion” as well as providing extended frequency response and maximize resolution in the medium and high frequencies of the audio program material.
- material. Aluminium cantilever
- 3.5mV output voltage
- Compatible body with all VM95 Series stylus assemblies
- 20 to 25,000Hz frequency response
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.
Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.
Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.
The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.
AT-VMN95C AT-VMN95E AT-VMN95EN AT-VMN95ML
AT-VMN95SH AT-VMN95SP
Features
Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.
No use of nuts
VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.
Specs
Model | AT-VM95ML |
Type | VM Stereo Dual Magnet |
Mounting | 1/2” centres |
Frequency Response | 20 - 25,000 Hz |
Channel Separation | 23 dB (1 kHz) |
Output Channel Balance | 1.5 dB (1 kHz) |
Output Voltage | 3.5 mV (@ 1 kHz, 5 cm/sec) |
Vertical Tracking Angle | 23° |
Vertical Tracking Force Range | 1.8 - 2.2g (standard 2.0 g) |
Stylus Shape | Microlinear |
Stylus Size | 2.2 x 0.12 mil |
Stylus Construction | Nude Square Shank |
Cantilever | Aluminium Pipe |
Coil Impedance | 3.3 kΩ (1 kHz) |
Coil Inductance | 550 mH (1 kHz) |
DC Resistance | 485 Ω |
Static Compliance | 20 x 10 – 6 cm / dyne |
Dynamic Compliance | 10 x 10 – 6 cm / dyne (100 Hz) |
Wire Used for Coil | T.P. Copper |
Recommended Load Impedance | 47,000 Ω |
Recommended Load Capacitance | 100-200 pF |
Cartridge Weight | 6.1g |
Dimensions | 17.2 x 18.9 x 28.3 ( H x W x D mm) |
Replacement Stylus | AT-VMN95ML |
Accessories Included | Two 11 mm installation screws; Two 8 mm installation screws; Two washers Non-magnetic screwdriver |
Share
Buy with Confidence
OVER 10,000 happy customers