Audio Technica AT-OC9XEN MC Cartridge
Audio Technica AT-OC9XEN MC Cartridge
FREE 5 YEAR WARRANTY INCLUDED
FREE 5 year warranty included on this item
Regular price
£309.00
Regular price
Sale price
£309.00
Unit price
/
per
Part Exchange / Trade In Quote?
Part Exchange / Trade In Quote?
Since its introduction more than 30 years ago, Audio-Technica’s pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. Featuring a square shank for accurate stylus alignment and nude diamond for increased fine detail retrieval.
- Features low mass nude elliptical stylus and aluminium cantilever
- A neodymium magnet and pure iron yoke provide increased magnetic energy
- Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required
- Aluminium body minimizes unwanted vibration for reduced resonance and a superior audio reproduction
- Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve the purest signal possible
Specs
Model | AT-OC9XEN |
Mounting | 1/2” centers / Threaded inserts |
Frequency Response | 20 to 30,000 Hz |
Body Material | Aluminium |
Channel Separation | 25 dB (1 kHz) |
Output Channel Balance | 1.5 dB (1 kHz) |
Output Voltage | 0.35 mV (at 1 kHz, 5 cm/sec) |
Vertical Tracking Angle | 20 degrees |
Vertical Tracking Force Range | 1.8 to 2.2 g (standard 2.0 g) |
Stylus Shape | Elliptical Nude |
Stylus Size | 0.3 x 0.7 mil |
Stylus Construction | Nude square shank |
Cantilever | Aluminium pipe |
Coil Impedance | 12 Ohms (1 kHz) |
Coil Inductance | 25 μH (1 kHz) |
DC Resistance | 12 Ohms |
Static Compliance | 20 x 10 – 6 cm / dyne |
Dynamic Compliance | 9 x 10 – 6 cm / dyne (100 Hz) |
Terminal Pins | Brass |
Wire Used for Coil | PCOCC (Copper by Ohno Continuous Casting process.) |
Recommended Load Impedance | Min 100 Ohms |
Cartridge Weight | 7.6 g |
Dimensions | 17.3 (H) x 16.8 (W) x 25.7 (L) mm |
Accessories Included | 1 non magnetic screw driver 1 brush 2 washers 4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm 1 plastic protector |
Share
Buy with Confidence
OVER 10,000 happy customers