Davone
Davone Moxie Loudspeakers
Davone Moxie Loudspeakers
Couldn't load pickup availability
Part Exchange / Trade In Quote?
Part Exchange / Trade In Quote?
Easy to place
With the bass reflex port in the front the Moxie can be placed close to the rear wall or in a corner, thus taking up little precious floor space. And the discrete terminals, the beautiful curved back and the timeless look of the stainless steel base make the Moxie a little gem that may be admired from all angles.
Danish loudspeakersDanish designed loudspeakers with the latest technology ensure the Moxie delivers on its promises: symmetric magnetic motor, solid aluminium basket, extensive venting, to name a few |
Controlled directivityBy integrating the cabinet design, cross over and drivers, the Moxie has a controlled directivity of sound, meaning the Moxie is less critical to the listening room acoustics |
Hand build in DenmarkBuild by hand in the for Denmark typical small scale production adds a personal touch to each loudspeaker. |
Finely tuned cross overthe elaborate 24 dB/oct Linkwitz - Riley cross over gives more upper mid range energy for a more open sound and improves the tweeter high power performance. |
Clean upper bassThe acoustic design of the cabinet effectively reduces internal standing waves around 200Hz for improved clarity |
Danish DesignCarefully considered curves are the heart of each unique Davone design. The perfect rhythm and balance of the design visualize music. |
Specs
-
Frequency response
45-22.000Hz
Impedance
4 ohm, 3.4 ohm minimum at 240Hz
Sensitivity
88 dB/2,83V/m
Recommended Amplifer power
50-100 Watt
Mid woofer
150mm, low distortion driver with a special fibre blend cone with optimal balance of stiffness, damping and density. Symmetric motor structure for optimal drive force symmetry. Designed in Denmark
Tweeter
1", Anodised aluminium dome, flow optimized vented pole piece with non-reflective chamber, saturation controlled motor system. Designed in Denmark
-
Cross over
2.4kHz, 24dB/Oct Linkwitz Riley
System
Bass reflex port in front
Cabinet Construction
The back panel is made from 7 layer beech wood form pressed veneer for increased stiffness and a unique appearance from all viewing angels. The form pressed baffle is made from 10 layers HDF
Weight
8 kg / piece
Height / Width / Depth
80 / 24 / 23 cm
Terminals
4mm gold plated banana socket
Current version
HR
Designer
Paul Schenkel
Share








Buy with Confidence
OVER 10,000 happy customers