Skip to content
Aavik
Aavik I-580 Integrated Amplifier
-
Sale
- Regular price £20,000.00
Worldwide Shipping 
- Description
- Features
- Specs
- Shipping Information (domestic & international)
- Want to hear it?
- Express Delivery
- Trade In
The Amplifier – your control and powerhouse
The Aavik amplifier receives the inputs from your individual Hi-Fi devices and transforms these signals into an authentic musical experience. Therefore, the architecture of the new Aavik amplifier boasts sophisticated high-end electronic components set in a state-of-the-art enclosure. Based on ample power supplies, the Aavik amplifier provides unprecedented dynamic speed, tight control and balanced stability, which creates persuasive and crystal clear soundstage images that reflect even finest sonic details.
AAVIK UMAC™ AMPLIFIER – UNMATCHED AUDIO CONTROL
At Aavik we utilize the patented UMAC™ amplifier technology. This technology was developed to avoid the design flaws of traditional switching amplifiers. UMAC technology primarily targets two areas of modulated amplifier design. Firstly, the PWM1) generation is produced with sine wave modulation rather than the more common triangle modulation. The benefit is that sine waves create far less high frequency noise than triangles, no sharp corners, and thus require far less inductive filtering at the output. The lower inductance in the output gives the amplifiers a much better damping factor and thus a distinctly better speaker control. Secondly, the advanced dual mixed mode feedback allows damping factors that are characteristic of only the very best linear amplifiers.
VOLUME CONTROL – AFFECTS THE SONIC EXPERIENCE
The Aavik line stage boasts a unique, inverted, virtual GND1) amplifier topology, which provides the highest stability. The feedback gets so powerful that it allows to damp the signal to a gain lower than 1. This preserves the full signal with the lowest S/N Ratio2) - no matter if you turn the volume up or down. This will provide your loudspeakers with a clear and distinct information flow to make even the finest details of timbral and textural nuances audible on an extremely quiet sound stage.
SEPARATE UNITS – NO COMPROMISE
The decision to build separate units reflects Aavik’s intent of space management without any sonic compromise. Allowing sufficient space for each segment has also influenced the integration of a high-grade power supply with a huge capacity and paved the way for an effective cooling design.
By separating the individual units and redesigning them in a totally isolated fashion, the Aavik series has gained in dynamic momentum and a more expansive sound.
SCANDINAVIAN DESIGN WITH AN INTERNATIONAL TWIST
The Aavik design is Scandinavian understatement and expresses simplicity and minimalism featuring only a few buttons for logical operation. The multifunctional main knob allows to navigate and control the various functions. A distinguishing design feature of the new Aavik series is a huge red display, which makes it easy to read all details of the selected operational settings.
A CABINET WITH EXCELLENT SONIC QUALITIES
The cabinet design represents a brand new Aavik characteristic. The testing of new circuits and electronic components is often done without the enclosing cabinet. The disturbing sonic influence, which emanates from the material the cabinet is made of - mostly aluminium - results from its mechanical resonance. To eliminate this sonic distortion, the challenge was to minimize the use of aluminium in the cabinet to the absolute minimum that is unavoidable to ensure sufficient cooling. Aavik began testing various materials and designed an innovative natural-based composite material, which reduces the mechanical influence, particularly the hysteresis. The sonic result is distinctly audible and reflects a further prominent cornerstone in Aavik’s quest for the ultimate music experience.
SHAPING – BUILT LIKE AN INSTRUMENT
Aavik’s untiring endeavour to unlock further untapped sonic potentials to advance the quality of the listener’s musical experience, prompted our audio engineers to look into the design and construction of musical instruments - both in terms of shape as well as choice of material. A combination of the natural-based composite material, the contours and the ratio of the sizes can impact and define the tone. Too much damping kills the dynamics, whereas metallic resonances generate a bright and peaky sound – Aavik’s newly engineered enclosure offers the best of both worlds: an authentic sound that is warm, harmonious and powerful, yet, at the same time, so crisp and refined that it highlights every single detail in the music.
PREMIUM TECHNOLOGIES FOR UNCONSTRAINED SIGNAL FLOW
For our new Aavik series, we could heavily draw on the experience and extensive R&D of our sister company, Ansuz-Acoustics™. We employed their groundbreaking, effective noise cancelling technologies and fitted all members of the new Aavik series with Tesla coils, dither circuitry and anti aerial resonance coils. These innovative technologies are geared towards paving the way for an absolutely unconstrained signal flow.
Aavik has also prepared the top and bottom surfaces on all Aavik series to best accommodate Ansuz Darkz™, which represent the most effective way of preventing mechanical vibrations.
RESONANT MODE POWER SUPPLY – QUIET BUT EXTREMELY POWERFUL
The new Aavik series is designed to ensure massive power resources with ultra-low noise. Unlike the square waves used by conventional switch mode power supplies, the new Aavik series boast a resonant mode design which is principally driven by sine waves.
When more power is needed, the operating frequency increases, which, in turn, has the advantage that the power density also increases, thus allowing higher peak power when required by the music.
The noise floor in the raw power supply is extremely low but could be even further lowered by the ultra-low noise regulators supplying the different parts of the circuit. The noise of these regulators is measured in a few microvolts respectively nanovolts, which is significantly lower than the noise level of conventional regulators.
| Integrated Amplifier I-580 | |||
| Line: | Gain (line 1 - 4: 5-15dB; maximum input 4.5V RMS | ||
| Gain (line 5: 1-11dB; maximum input 6.5V RMS | |||
| Input impedance 10K ohm | |||
| Pre-amp. Output: | 1 pair of RCA output | ||
| Max output: 7,5Vrms | |||
| Distortion, line stage: <0,005% (THD at 1kHz, 1V input) | |||
| Output impedance: 50 ohms | |||
| Volume control: | 76 1dB steps | ||
| Output: | 2 x 300W 8 ohm, 2 x 600W 4 ohm | ||
| Distortion (THD+N): <0,006% (1-100W, 1kHz, 8 ohm | |||
| IMD: <0,002% (1-100W, 4 ohm) | |||
| TIM: <0,008% )1-100W, 4 ohm) | |||
| Aavik Noise Reduction | Active Tesla Coils: 108 | ||
| Active Square Tesla Coils: 240 | |||
| Dither circuitry: 11 | |||
| Anti Aerial Resonance Coils: 4 | |||
| Power consumption: | Standby: <0.5W | ||
| Idle: <50W | |||
| Dimensions: | 102 x 384 x 400mm | ||
| Weight: | 8.8 kg |
UK Deliveries
Within the UK we aim to ship all items same day, however during busy periods it can take 1-3 days for dispatch. We ship all items with premium courier services which quote 1-2 days for delivery. Please note these times may be effected due to circumstances outside our control. Shipping is free on all orders over £50.
Ireland Deliveries
Following Brexit, We are still able to ship into Ireland, and no further VAT or charges apply. All Irish orders will dispatch from our N.Ireland warehouse, and therefore no charges apply. Shipping is free on all Irish orders over £50.00.
Europe Deliveries
For deliveries in Europe, we have two options which can be chosen by the customer.
N.Ireland - We can ship your goods from our N.Ireland warehouse, in which case we must charge VAT however due to N.Ireland's free trade agreement with Europe you will therefore not be charged any import duty or further costs. Shipping costs are calculated at the checkout based on destination.
Britain - We can ship orders from our British warehouse (UK Mainland) which will be charged ex VAT, however this will require export paperwork, and import duty and applicable charges will apply. VAT is removed at the checkout if your destination is applicable.
Non EU Countries
If you are purchasing from a Non-EU country, you will not be charged VAT which will be deducted at the checkout. Import duties and further applicable charges may apply depeding on your country. Shipping is calculated at the checkout based on destination.
We have several deomonstation areas in both of our branches. Please give us a call on 03435236169 or email support@kronosav.com to enquire about hearing products at your local branch.
Please always contact us before to make sure the product(s) are available
Express Deliveries
Express Delivery is FREE on all orders over £50. Express Delivery offers delivery in 24-72 hours from time of purchase. We use premium couriers for this service, mainly DPD & Royal Mail. DPD will offer you a one hour window for delivery to make sure someone is at home, or you can reschedule the delivery if no one is around.
Standard Deliveries
Here at Kronos AV, we have vast experience with e-commerce sales. Making sure that your parcel arrives undamaged is a huge priority for us. That’s why at Kronos AV, we only use premium couriers for all our orders. All our parcels are shipped with DPD or Royal Mail and are always sent Signed For to make sure it gets to the right person.
If for any reason your parcel does arrived damaged, please get in touch, and we will be happy to get everything resolved for you. We are always on hand to help!
Details
Delivery is FREE on all orders over £50. In order to offer FREE delivery to UK customers, we use several premium couriers to ensure your delivery arrives safe.
Most large orders (over 2kg) ship using DPD or DHL courier and smaller orders (under 2kg) by Royal Mail signed for services.
The most appropriate courier will be chosen for the items ordered to ensure the quickest possible delivery.
We can offer very generous trade in offers across the majority of our product range.
Why not ask and see how much you HiFi is worth!
To find out how much your HiFi is worth... Click Here
If you have any question, please feel free to call us on 03435236169 or email support@kronosav.com
Aavik
- Description
- Features
- Specs
- Shipping Information (domestic & international)
- Want to hear it?
- Express Delivery
- Trade In
The Amplifier – your control and powerhouse
The Aavik amplifier receives the inputs from your individual Hi-Fi devices and transforms these signals into an authentic musical experience. Therefore, the architecture of the new Aavik amplifier boasts sophisticated high-end electronic components set in a state-of-the-art enclosure. Based on ample power supplies, the Aavik amplifier provides unprecedented dynamic speed, tight control and balanced stability, which creates persuasive and crystal clear soundstage images that reflect even finest sonic details.
AAVIK UMAC™ AMPLIFIER – UNMATCHED AUDIO CONTROL
At Aavik we utilize the patented UMAC™ amplifier technology. This technology was developed to avoid the design flaws of traditional switching amplifiers. UMAC technology primarily targets two areas of modulated amplifier design. Firstly, the PWM1) generation is produced with sine wave modulation rather than the more common triangle modulation. The benefit is that sine waves create far less high frequency noise than triangles, no sharp corners, and thus require far less inductive filtering at the output. The lower inductance in the output gives the amplifiers a much better damping factor and thus a distinctly better speaker control. Secondly, the advanced dual mixed mode feedback allows damping factors that are characteristic of only the very best linear amplifiers.
VOLUME CONTROL – AFFECTS THE SONIC EXPERIENCE
The Aavik line stage boasts a unique, inverted, virtual GND1) amplifier topology, which provides the highest stability. The feedback gets so powerful that it allows to damp the signal to a gain lower than 1. This preserves the full signal with the lowest S/N Ratio2) - no matter if you turn the volume up or down. This will provide your loudspeakers with a clear and distinct information flow to make even the finest details of timbral and textural nuances audible on an extremely quiet sound stage.
SEPARATE UNITS – NO COMPROMISE
The decision to build separate units reflects Aavik’s intent of space management without any sonic compromise. Allowing sufficient space for each segment has also influenced the integration of a high-grade power supply with a huge capacity and paved the way for an effective cooling design.
By separating the individual units and redesigning them in a totally isolated fashion, the Aavik series has gained in dynamic momentum and a more expansive sound.
SCANDINAVIAN DESIGN WITH AN INTERNATIONAL TWIST
The Aavik design is Scandinavian understatement and expresses simplicity and minimalism featuring only a few buttons for logical operation. The multifunctional main knob allows to navigate and control the various functions. A distinguishing design feature of the new Aavik series is a huge red display, which makes it easy to read all details of the selected operational settings.
A CABINET WITH EXCELLENT SONIC QUALITIES
The cabinet design represents a brand new Aavik characteristic. The testing of new circuits and electronic components is often done without the enclosing cabinet. The disturbing sonic influence, which emanates from the material the cabinet is made of - mostly aluminium - results from its mechanical resonance. To eliminate this sonic distortion, the challenge was to minimize the use of aluminium in the cabinet to the absolute minimum that is unavoidable to ensure sufficient cooling. Aavik began testing various materials and designed an innovative natural-based composite material, which reduces the mechanical influence, particularly the hysteresis. The sonic result is distinctly audible and reflects a further prominent cornerstone in Aavik’s quest for the ultimate music experience.
SHAPING – BUILT LIKE AN INSTRUMENT
Aavik’s untiring endeavour to unlock further untapped sonic potentials to advance the quality of the listener’s musical experience, prompted our audio engineers to look into the design and construction of musical instruments - both in terms of shape as well as choice of material. A combination of the natural-based composite material, the contours and the ratio of the sizes can impact and define the tone. Too much damping kills the dynamics, whereas metallic resonances generate a bright and peaky sound – Aavik’s newly engineered enclosure offers the best of both worlds: an authentic sound that is warm, harmonious and powerful, yet, at the same time, so crisp and refined that it highlights every single detail in the music.
PREMIUM TECHNOLOGIES FOR UNCONSTRAINED SIGNAL FLOW
For our new Aavik series, we could heavily draw on the experience and extensive R&D of our sister company, Ansuz-Acoustics™. We employed their groundbreaking, effective noise cancelling technologies and fitted all members of the new Aavik series with Tesla coils, dither circuitry and anti aerial resonance coils. These innovative technologies are geared towards paving the way for an absolutely unconstrained signal flow.
Aavik has also prepared the top and bottom surfaces on all Aavik series to best accommodate Ansuz Darkz™, which represent the most effective way of preventing mechanical vibrations.
RESONANT MODE POWER SUPPLY – QUIET BUT EXTREMELY POWERFUL
The new Aavik series is designed to ensure massive power resources with ultra-low noise. Unlike the square waves used by conventional switch mode power supplies, the new Aavik series boast a resonant mode design which is principally driven by sine waves.
When more power is needed, the operating frequency increases, which, in turn, has the advantage that the power density also increases, thus allowing higher peak power when required by the music.
The noise floor in the raw power supply is extremely low but could be even further lowered by the ultra-low noise regulators supplying the different parts of the circuit. The noise of these regulators is measured in a few microvolts respectively nanovolts, which is significantly lower than the noise level of conventional regulators.
| Integrated Amplifier I-580 | |||
| Line: | Gain (line 1 - 4: 5-15dB; maximum input 4.5V RMS | ||
| Gain (line 5: 1-11dB; maximum input 6.5V RMS | |||
| Input impedance 10K ohm | |||
| Pre-amp. Output: | 1 pair of RCA output | ||
| Max output: 7,5Vrms | |||
| Distortion, line stage: <0,005% (THD at 1kHz, 1V input) | |||
| Output impedance: 50 ohms | |||
| Volume control: | 76 1dB steps | ||
| Output: | 2 x 300W 8 ohm, 2 x 600W 4 ohm | ||
| Distortion (THD+N): <0,006% (1-100W, 1kHz, 8 ohm | |||
| IMD: <0,002% (1-100W, 4 ohm) | |||
| TIM: <0,008% )1-100W, 4 ohm) | |||
| Aavik Noise Reduction | Active Tesla Coils: 108 | ||
| Active Square Tesla Coils: 240 | |||
| Dither circuitry: 11 | |||
| Anti Aerial Resonance Coils: 4 | |||
| Power consumption: | Standby: <0.5W | ||
| Idle: <50W | |||
| Dimensions: | 102 x 384 x 400mm | ||
| Weight: | 8.8 kg |
UK Deliveries
Within the UK we aim to ship all items same day, however during busy periods it can take 1-3 days for dispatch. We ship all items with premium courier services which quote 1-2 days for delivery. Please note these times may be effected due to circumstances outside our control. Shipping is free on all orders over £50.
Ireland Deliveries
Following Brexit, We are still able to ship into Ireland, and no further VAT or charges apply. All Irish orders will dispatch from our N.Ireland warehouse, and therefore no charges apply. Shipping is free on all Irish orders over £50.00.
Europe Deliveries
For deliveries in Europe, we have two options which can be chosen by the customer.
N.Ireland - We can ship your goods from our N.Ireland warehouse, in which case we must charge VAT however due to N.Ireland's free trade agreement with Europe you will therefore not be charged any import duty or further costs. Shipping costs are calculated at the checkout based on destination.
Britain - We can ship orders from our British warehouse (UK Mainland) which will be charged ex VAT, however this will require export paperwork, and import duty and applicable charges will apply. VAT is removed at the checkout if your destination is applicable.
Non EU Countries
If you are purchasing from a Non-EU country, you will not be charged VAT which will be deducted at the checkout. Import duties and further applicable charges may apply depeding on your country. Shipping is calculated at the checkout based on destination.
We have several deomonstation areas in both of our branches. Please give us a call on 03435236169 or email support@kronosav.com to enquire about hearing products at your local branch.
Please always contact us before to make sure the product(s) are available
Express Deliveries
Express Delivery is FREE on all orders over £50. Express Delivery offers delivery in 24-72 hours from time of purchase. We use premium couriers for this service, mainly DPD & Royal Mail. DPD will offer you a one hour window for delivery to make sure someone is at home, or you can reschedule the delivery if no one is around.
Standard Deliveries
Here at Kronos AV, we have vast experience with e-commerce sales. Making sure that your parcel arrives undamaged is a huge priority for us. That’s why at Kronos AV, we only use premium couriers for all our orders. All our parcels are shipped with DPD or Royal Mail and are always sent Signed For to make sure it gets to the right person.
If for any reason your parcel does arrived damaged, please get in touch, and we will be happy to get everything resolved for you. We are always on hand to help!
Details
Delivery is FREE on all orders over £50. In order to offer FREE delivery to UK customers, we use several premium couriers to ensure your delivery arrives safe.
Most large orders (over 2kg) ship using DPD or DHL courier and smaller orders (under 2kg) by Royal Mail signed for services.
The most appropriate courier will be chosen for the items ordered to ensure the quickest possible delivery.
We can offer very generous trade in offers across the majority of our product range.
Why not ask and see how much you HiFi is worth!
To find out how much your HiFi is worth... Click Here
If you have any question, please feel free to call us on 03435236169 or email support@kronosav.com
