Skip to product information
1 of 1

Audio Technica

Audio Technica AT33MONO Cartridge

Audio Technica AT33MONO Cartridge

BUY WITH CONFIDENCE We are a 2 x Global Award Winning Retailer
Read More
FREE 5 YEAR WARRANTY INCLUDED FREE 5 year warranty included on this item
Regular price $ 6,325.00
Regular price Sale price $ 6,325.00
Sale Sold out

Part Exchange / Trade In Quote?

The AT33Mono is made specifically for use on mono systems. It has a horizontal coil, and so in principle only generates electricity horizontally. 

The AT33Mono produces sound to a very high quality because it does not easily pick up unnecessary strain components from distorted or scratched records, producing audio that you couldn't possibly get from a stereo cartridge. 

The AT33Mono also has appropriate compliance in the vertical direction, so will not cause damage to stereo records. Enjoy those well-known classic mono records of yesteryear with the AT33Mono.

  • Mono cartridge compatible with stereo playback systems.
  • Elliptical stylus chip and hard duralumin cantilever.
  • 10O middle impedance specification.
  • PCOCC coil prevents crystal gain boundary formation (in transmission direction).
  • Strong body stabilized by a rigid body set-up.
  • "Hanenite" anti-vibration rubber eliminates unnecessary vibrations.
  • High-quality sound / Brass fastening screw.

*This model is not compatible with SP records.

Specs
Type MC-type
Mounting 1/2" Centers
Frequency Response 20 - 20,000Hz
Body Material Aluminium/Synthetic Resin
Channel Separation 30dB (1kHz)
Output Channel Balance 1.0dB (1kHz)
Output Voltage 0.35mV (1kHz and 5cm/sec. horizontal signal)
Vertical Tracking Angle 23°
Vertical Tracking Force Range 2.3 - 2.7g (2.5g standard)
Stylus Shape Conical
Stylus Size 0.65 mil
Cantilever Duralumin pipe
Coil Impedance 10Ω (1kHz)
Coil Inductance 28µH (1kHz)
DC Resistance 10Ω
Static Compliance 20×10-6cm/dyne
Dynamic Compliance 6×10-6cm/dyne (100Hz)
Recommended Load Impedance More than 100Ω (when head amp connected)
Weight 6.9g
Dimensions H16×W16.6×D26.5mm
Replacement Stylus When the stylus is to be replaced, replace the entire cartridge. Take the used cartridge to your Audio-Technica Authorised Service Centre. The new cartridge, or any other model which is desired among the line-up of MC cartridges sold by Audio-Technica, are available at the stylus replacement price.
Accessories Included Non-magnetic screwdriver x1, Washers x2, Protector x1, Cartridge fastening screw 13mm×2, 19mm×2, Nut x2, Brush x1, PCOCC lead set x1
View full details

Buy with Confidence

OVER 10,000 happy customers