Accessories

Michell Engineering Synthetic Turntable Bearing Oil
£4.00
Michell Engineering Synthetic Turntable Bearing Oil  Keep your turntable running smoothly For use with all turntable bearings
Michell Engineering Synthetic Turntable Bearing Oil  Keep your turntable running smoothly For use with all turntable bearings
VC-S Spout
£4.50
Replacement Spout for the Pro-Ject VC-S. This removable spout is used for when emptying the VC-S's water tank.
Replacement Spout for the Pro-Ject VC-S. This removable spout is used for when emptying the VC-S's water tank.
Kronos AV Stylus Cleaner + Brush
£4.99 £7.99
Specially formulated anti-static stylus cleaning fluid with built-in applicator brush. Safely cleans styli without leaving residue.  
Specially formulated anti-static stylus cleaning fluid with built-in applicator brush. Safely cleans styli without leaving residue.  
Kronos AV Tonearm Spirit Level
£4.99
The Kronos Bubble Spirit Level is a small and simple tool, ideally suited to helping you level your turntable or Tonearm. A level turntable will help improve sonic performance by reducing the chance of structural movement, and allowing the platter to turn at a consistent, level speed.
The Kronos Bubble Spirit Level is a small and simple tool, ideally suited to helping you level your turntable or...
Kronos AV Stylus Inspector with LED Light
£4.99
Dust is one of the most common problems with high fidelity reproduction when it comes to playing your vinyl. This is were the KronosAV stylus inspector comes in. With a built in LED light, it allows for an illuminated inspection to make sure there is no dust or comtaminates on your stylus Simply open the inspector by gripping the two triangles gently and pulling away from the main body The LED will illuminate automatically, and turn off once slid back into the main body.
Dust is one of the most common problems with high fidelity reproduction when it comes to playing your vinyl. This...
Pro-Ject Anti-Skate Weight
£4.99
The Anti-Skate Weight is attached to a thin fishing wire that hooks onto the rear of most Pro-Ject tonearms and hangs over the Anti-Skate Hoop. This allows for the perfect amount of counter-drag on the tonearm (all tonearms have a natural side-ways momentum), reducing the inclination for the arm to 'skip' or 'skate' across the record
The Anti-Skate Weight is attached to a thin fishing wire that hooks onto the rear of most Pro-Ject tonearms and...
Pro-Ject Anti-Skate Weight
£5.00
The Anti-Skate Weight is attached to a thin fishing wire that hooks onto the rear of most Pro-Ject tonearms and hangs over the Anti-Skate Hoop. This allows for the perfect amount of counter-drag on the tonearm (all tonearms have a natural side-ways momentum), reducing the inclination for the arm to 'skip' or 'skate' across the record.*Please Note: This weight is supplied pre-attached to the fishing wire.
The Anti-Skate Weight is attached to a thin fishing wire that hooks onto the rear of most Pro-Ject tonearms and...
Michell Engineering Cartridge Mounting Kit
£6.75
This High Precision kit direct from Michell Engineering Contains two 10mm and two 16mm long stainless steel allen bolts, washers, nuts and allen key.
This High Precision kit direct from Michell Engineering Contains two 10mm and two 16mm long stainless steel allen bolts, washers,...
Audio Technica AT607 Stylus Cleaning Fluid
£7.49
The AT607 stylus cleaning fluid extends both stylus and record life. The special cleaning formula dissolves dust and dirt known to hinder proper tracking. An applicator brush is attached to the cap for ease of use. 10ml volume Applicator brush is attached to the cap for ease of use
The AT607 stylus cleaning fluid extends both stylus and record life. The special cleaning formula dissolves dust and dirt known...
Pro-Ject TFG / Protractor
£7.99
This is a basic tool for the measuring of cartridge tracking force weight and alignment.Setting up the tracking force of a pre-installed cartridge on a Pro-Ject deck is a very simple process. Simply place the stylus tip on the desired weight, then move the tonearm counterweight forward and backward on the back of the tonearm until the protractor is level (it is pivoted like a see-saw in the middle).This tool is included as standard with almost all Pro-Ject record players.
This is a basic tool for the measuring of cartridge tracking force weight and alignment.Setting up the tracking force of...
Michell Engineering Tenderfeet
£8.25
Tenderfeet Although initially designed for use with our turntables, Tenderfeet can be used under any item of audio equipment.  Milled from aluminium, which is then anodized to reduce discoloration or tarnishing, Tenderfeet are supplied in packs of three.  
Tenderfeet Although initially designed for use with our turntables, Tenderfeet can be used under any item of audio equipment.  Milled...
Audio Technica AT634 Record Cleaning Fluid
£8.49
Record care solution   One bottle supplied with AT6012 record care kit Two ounces - 56ml
Record care solution   One bottle supplied with AT6012 record care kit Two ounces - 56ml
Kronos AV Carbon Fibre Record Cleaning Brush
£9.99 £14.99
An anti-static vinyl record cleaning brush made from conductive carbon fibres. The brush eliminates static build-up and removes dirt and the finest of dust particles that may compromise sound reproduction quality.
An anti-static vinyl record cleaning brush made from conductive carbon fibres. The brush eliminates static build-up and removes dirt and...
Pro-ject Debut Felt Mats (10")
£9.99
Debut Felt Mats (10") The use of a felt mat helps ensure a smooth rotation of the record on the turntable platter. Often called a slip mat, their design is simply to sit under the record and on top of the platter. These are replacement felt mats for the 10" platter used on all Pro-Ject Debut turntable models (excluding the Debut S/E3 and Debut Carbon), in a variety of different colour finishes. These replacement felt mats were supplied in most low-mid-range Pro-Ject turntables.The 10" option is for use with:  Debut II Debut III Debut Phono S/B Debut Phono USB Jukebox Available finishes: Black Green Yellow
Debut Felt Mats (10") The use of a felt mat helps ensure a smooth rotation of the record on the...
Audio Technica AT-HS1 Headshell
£9.99
10g dj style 1/2”-mount cartridge headshell This headshell for 1/2”-mount cartridges and 4-pin turntable arm (Audio-Technica, Technics, SME) features all-metal construction and an integral finger lift. It is equipped with a rubber washer for a secure fit to your tone arm, and comes with colour-coded headshell lead wires and cartridge mounting screws, nuts and washer.   All metal construction with integral finger lift Rubber washer for secure fit to tone arm Color coded lead wires and cartridge mounting hardware No tilt adjustment No overhang adjustment of the headshell on the arm (cartridge overhang adjustment is provided by the two slots on the headshell)  
10g dj style 1/2”-mount cartridge headshell This headshell for 1/2”-mount cartridges and 4-pin turntable arm (Audio-Technica, Technics, SME) features all-metal...
Audio Technica AT6101 Cartridge to headshell
£9.99
Cartridge to headshell PCOCC lead wires Perfect Crystal OCC quad wire (PCOCC high purity oxygen free conductor) 0.12mm x 22 core strand construction 24K gold plated crimped lead tip
Cartridge to headshell PCOCC lead wires Perfect Crystal OCC quad wire (PCOCC high purity oxygen free conductor) 0.12mm x 22...
Audio Technica ATN3600L Replacement Stylus
£11.99
This ATN3600L styli is compatible with the following cartridges:AT3600 - AT3600L - AT3601 - AT3651 - AT3650L - AT3650C - AT3650 - AT3626 This is also the replacement stylus for turntable models Audio-Technica LP60USB and LP60.
This ATN3600L styli is compatible with the following cartridges:AT3600 - AT3600L - AT3601 - AT3651 - AT3650L - AT3650C -...
Michell Engineering Finger Locking Nut
£13.25
Finger Locking Nut is a handy nut that replaces the hex nut as supplied with most Rega arms. It allows for easier removal and refitting of your Rega arm and, when used in conjunction with our VTA Arm Adjuster, is ideal for making quick incremental adjustments to the arm’s VTA. A straight replacement for the standard hex nut, which is often times difficult to remove due to non-standard size, our Finger Locking Nut fits Rega’s RB250, RB300 and RB600 tonearms.
Finger Locking Nut is a handy nut that replaces the hex nut as supplied with most Rega arms. It allows...
Wash-IT
£14.50
Replacement washer fluid for the Pro-Ject VC-S. This cleaning fluid is specially formulated to remove the deepest dirt from your records and keeping them clean and protected whilst also reducing static charge build-up. The Wash-IT fluid is available in volumes of 100ml, 250ml, 500ml and 1 litre bottles. (1 litre of fluid can clean around 1500 records.) Set-Up Video: Original Wash-IT cleaning solution contains Isopropyl Alcohol. Isopropyl Alcohol – sometimes called rubbing alcohol – is termed as “Hazardous household waste” (like many other cleaners) and should be disposed of at your local Waste Recycling Centre. From S/N 16F0003587 and including (16F0002625-16F0002666), (16F0002822-16F0002879), (16F001335-16F001434), (16F0002667-16F0002766): VC-S contains new alcohol free Wash-IT.
Replacement washer fluid for the Pro-Ject VC-S. This cleaning fluid is specially formulated to remove the deepest dirt from your...
Pro-Ject 78 Speed Box Pulley
£14.50
The 78RPM pulley has been designed for Pro-Ject turntables which can rotate at 78RPM when combined with the Pro-Ject Speedbox. The 78RPM pulley will allow playback of 78RPM records on Pro-Ject’s various speedbox-compliant turntables, whilst also allowing playback at 33.3 and 45 RPM. The Pulley is designed to replace the stock pulley supplied with your turntable and is fitted into place by a simple grub screw. Compatibility: The following models will not work with any Speed Box... Essential (all models) RPM 1 Genie (all models) Debut III E 1 Xpression Carbon Xperience (all models including Basic+, 2Pack, VPack and Super Pack) 6 Perspex RPM 9 (all models) RPM 10 (all models) For more on playing 78RPM records on Pro-Ject turntables, click here.
The 78RPM pulley has been designed for Pro-Ject turntables which can rotate at 78RPM when combined with the Pro-Ject Speedbox....
Michell Engineering Cartridge Tags (Set of 4)
£14.95
We think that these are the ultimate cartridge tags and they come as standard on our Techno Arm ‘A’.  Silver-platted for superior conductivity, our cartridge tags are milled from solid brass and offer a unique spring-loaded connection for improved pin contact.  Four colour-coded heat-shrink sleeves are included.
We think that these are the ultimate cartridge tags and they come as standard on our Techno Arm ‘A’.  Silver-platted...