Audio Technica AT33EV Cartridge
Audio Technica AT33EV Cartridge
Couldn't load pickup availability
Part Exchange / Trade In Quote?
Part Exchange / Trade In Quote?
The original model of this stereo cartridge is the AT33ANV, which was available as a special release to celebrate our 45th anniversary. The A33ANV was the first in the AN33 series to feature a Duralumin cantilever, which received wide acclaim for its sound quality. Retaining the basic specification, we present a further improved and evolved model.
The A33EV isa ½ inch, standard mount 0.3 x 0.7 mil elliptical cartridge featuring a tapered Duralumin cantilever which reduces the effective mass of the cartridge, resulting in a more durable cantilever. The Dual Moving Coil cartridge design increases channel separation and extends the frequency response range delivering extraordinary audio quality. Internally constructed with a neodymium magnet enhances magnetic energy and PCOCC wire for pure audio transmission.
- Elliptical stylus chip and durable duralumin tapered pipe cantilever.
- 10O mid impedance specifications.
- Dramatically increased magnetism with neodymium magnets and PCOCC as the coil.
- High separation, wide-response dual moving coil.
- VC Mold eliminates unnecessary vibrations.
- "Hanenite" anti-vibration rubber eliminates unwanted vibrations.
Specs
| Type | Dual Moving Coil |
| Mounting | 1/2" Centers |
| Frequency Response | 15 - 50,000Hz |
| Body Material | Aluminium/Synthetic Resin |
| Channel Separation | 30dB (1kHz) |
| Output Channel Balance | 0.5dB (1kHz) |
| Output Voltage | 0.3mV (1kHz and 3.54cm/sec.) |
| Vertical Tracking Angle | 23° |
| Vertical Tracking Force Range | 1.8 - 2.2g (2.0g standard) |
| Stylus Shape | Elliptical |
| Stylus Curvature Radius | 0.3 x 0.7 mil |
| Stylus Construction | Nude Square Shank |
| Cantilever | Duralumin |
| Coil Impedance | 10Ω (1kHz) |
| Coil Inductance | 22µH (1kHz) |
| DC Resistance | 10Ω |
| Static Compliance | 40×10-6cm/dyne |
| Dynamic Compliance | 10×10-6cm/dyne (100Hz) |
| Terminal Pins | Brass |
| Recommended Load Impedance | More than 100Ω (when head amp connected) |
| Weight | 6.9g |
| Dimensions | H16×W16.6×D26.5mm |
| Replacement Stylus | When the stylus is to be replaced, replace the entire cartridge. Take the used cartridge to your Audio-Technica Authorised Service Centre. The new cartridge, or any other model which is desired among the line-up of MC cartridges sold by Audio-Technica, are available at the stylus replacement price. |
| Accessories Included | Non-magnetic screwdriver × 1, Washer × 2, Protector × 1, Cartridge installation screws 13 mm × 2 and 19 mm × 2, Nut × 2, Brush × 1, PCOCC lead set × 1 |
Buy with Confidence
OVER 16,000 Happy Customers