• Audio Technica AT-LP3 Fully Automatic Turntable / Record Player - Kronos AV
  • Audio Technica AT-LP3 Fully Automatic Turntable / Record Player - Kronos AV
  • Audio Technica AT-LP3 Fully Automatic Turntable / Record Player - Kronos AV
  • Audio Technica AT-LP3 Fully Automatic Turntable / Record Player - Kronos AV
  • Audio Technica AT-LP3 Fully Automatic Turntable / Record Player - Kronos AV
1 7

Audio Technica

Audio Technica AT-LP3 Fully Automatic Turntable / Record Player

Audio Technica AT-LP3 Fully Automatic Turntable / Record Player

WANT 5% OFF THIS ITEM? - More info
$ 4,809.00
$ 4,809.00
Sale Sold out
Finish

Part Exchange / Trade In Quote?

ADVANCED FULLY-AUTOMATIC BELT-DRIVE TURNTABLE

A revolution in automation, the LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33⅓ & 45 RPM records with a pre-mounted AT91R Dual Moving Magnet phono cartridge whilst the tonearm’s removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP3 represents the next level for vinyl lovers.

  • Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
  • Balanced straight tonearm with hydraulically damped lift control and lockable rest
  • Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
  • Switchable modes for moving magnet and moving coil cartridges
  • AT91R Dual Moving Magnet™ phono cartridge and AT-HS3 universal headshell
  • Anti-resonance, die-cast aluminium platter with 4.5 mm thick rubber mat
  • Damped base construction for reduced low-frequency feedback colouration
 

MM / MC CARTRIDGE SELECTOR SWITCH

Switchable MM/MC mode allows the listener to use both Moving Magnet and Moving Coil cartridges on their LP3, allowing for greater sonic customisation – a unique feature not found on most turntables with a built-in phono preamplifier.

Set Up Video
 
Specs
Turntable
Type
Fully Automatic, Belt-Drive
Motor
DC motor
Speeds
33-1/3 RPM, 45 RPM
Turntable Platter
Die-cast aluminium
Wow and Flutter
Less than 0.2% WRMS (33 1/3 RPM) at3kHz
Signal-to-Noise Ratio
> 60 dB
Output Level
“PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec 
“LINE” (MC) 220mV nominal at 1kHz, 5cm/sec
Phono Pre-Amp Gain
36dB nominal, RIAA equalised
56dB nominal, RIAA equalised
Power Supply Requirements
220 to 240 V / 50, 60 Hz
Power Consumption
2W
Dimensions
435 mm ×353 mm×128 mm (W×D×H)
Weight
5.2kg
Accessories Included
Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable
Cartridge & Stylus
Model
AT91R
Type
VM Dual Magnet
Output Voltage
3.5mV (mV at 1kHz, 5 cm/sec)
Vertical Tracking Force Range
1.5 to 2.5g (standard 2.0g)
Stylus Construction
0.6 mil bonded conical
Cantilever
Aluminium pipe
Recommended Load Impedance
47,000 ohms
Weight
5.0g
Headshell
Model
AT-HS3
Weight
11.1g
Overhang Adjustment
8mm
Tone arm
Type
Static balanced straight shaped with soft damping control
Effective Length
221.5mm
Overhang
19mm
Maximum Tracking Error Angle
Less than 3°
Stylus Pressure Adjustment Range
1 to 4g
Applicable Cartridge Weight
14.5 to 20g
Anti-skating Range
0 - 3 g
 
Please note these are B stock models (hence the reduced price) and may have some marks on the packaging
View full details

Buy with Confidence

OVER 10,000 happy customers