Eversolo DAC-Z10 DAC (due early DEC)

*Stock Availability From 01/12/25

• Fully Isolated Architecture (FIA™), which completely separates the digital and analogue domains to minimise interference and preserve signal purity.
• Three independent linear power supplies individually power the left channel, system, and right channel, allowing each to operate in an ultra-low-noise environment.
• Two sets of AK4191 + AK4499 DACs for independent left and right channels - AKM’s Velvet Sound™.
• Fully balanced analogue preamplifier that employs precise dual-channel R2R volume control.
• Eversolo Precision Core™ OCXO Temperature-Controlled Crystal Oscillator + Phase-Locked Loop Technology with External 10 MHz & 25 MHz High-Precision Clock Support.
• FPGA Redefined - A built-in FPGA that shapes IIS data and refines the clock. Every digital signal is thus optimised to its purest form before reaching the DAC.
• Grounding Post - The grounding post channels noise away, eliminating even minor interference and preserving the purity of each note.
• 8-Mode IIS Digital Audio Input - Via IIS digital audio input, offers 8 switchable modes and supports up to 768kHz/ 32Bit PCM and DSD512 Native. 
• Isolated AES/EBU Input - Features a dedicated isolated AES/EBU input, fully separating electrical noise between front-end and back-end devices.
• HDMI ARC Integration - Equipped with HDMI ARC, supporting both ARC and eARC modes for effortless integration into your home theatre system.
• 6.35mm Powerful Headphone Amplifier Module - Dedicated 6.35 mm headphone amplifier module that auto-detects impedance and adjusts gain.
• High Quality Bluetooth Module - Features a built-in Qualcomm QCC5125 Bluetooth module.
• 8.8-inch IPS touchscreen.
• Left/Right Balance Gain - Offers up to 15dB of left/right balance gain adjustment.
• Customise Your Sound - Offers 6 DAC filter characteristics, letting you switch freely to suit different musical atmospheres.
• Full Function Remote Control.
• High Quality USB and Trigger Cables Included.

Model : Eversolo DAC-Z10

Display : 8.8" IPS

Chassis Material : Aluminium alloy

Main Processor : DCP8568

DAC : Left Channel: AK4191+AK4499 / Right Channel: AK4191+AK4499

Audio Processor : Multi-core USB audio processor

OPA Chip @ OPA1612

Power : Triple ultra-low noise linear power supplies

Audio Inputs and Outputs

Bluetooth Audio Input

Qualcomm QCC5125 Bluetooth module, Bluetooth version: BT5.0; supports SBC/AAC Bluetooth audio protocols

USB-B Audio Input

Compatible with Windows 10 and above, macOS, Android, and iOS; supports up to Stereo DSD512 / PCM 768kHz 32Bit

IIS Input

Supports 8 mode configurations, up to Stereo DSD512 / PCM 768kHz 32Bit

AES/EBU Input

Up to Stereo PCM 192KHz/24Bit / DSD64 DoP

Optical Audio Inputs *2

Up to Stereo PCM 192KHz/24Bit / DSD64 DoP

Coaxial Audio Inputs *2

Up to Stereo PCM 192KHz/24Bit / DSD64 DoP

ARC Input

Up to Stereo PCM 192KHz/24Bit

Analogue Audio Inputs

XLR (Balanced), RCA

Analogue Audio Outputs

Pre-out: XLR (Balanced), RCA; Headphone out: 6.35mm single-ended

External Clock Input

Supports 10M/25M clock inputs with 50Ω or 75Ω impedance

Recommended Headphone Impedance

16–300Ω (Low Gain: 16–32Ω / High Gain: 32–300Ω)

XLR Output Audio Characteristics

• Output Level (Vrms): 5Vrms @ 0dBFS
• THD+N @ No-wt: 0.00008% @ 1kHz (-122dB @ 1kHz)
• Noise @ No-wt: <1.2uVrms
• SNR @ A-wt: 130dB
• Frequency Response: 20Hz–20kHz (±0.1dB)
• Crosstalk: -130dB
• DNR @ A-wt: 130dB

RCA Output Audio Characteristics

• Output Level (Vrms): 2.5Vrms @ 0dBFS
• THD+N @ No-wt: 0.000097% @ 1kHz (-120dB @ 1kHz)
• Noise @ No-wt: <1.5uVrms
• SNR @ A-wt: 128dB
• Frequency Response: 20Hz–20kHz (±0.1dB)
• Crosstalk: -123dB
• DNR @ A-wt: 128dB

Headphone Audio Characteristics (Low Gain Mode)

• Output Level (Vrms): 4Vrms @ 0dBFS
• THD+N @ No-wt: 0.0003% @ 1kHz (-110dB @ 1kHz)
• Noise @ No-wt: <2.5uVrms
• SNR @ A-wt: 124dB
• Frequency Response: 20Hz–20kHz (±0.1dB)
• DNR @ A-wt: 124dB

Headphone Audio Characteristics (Mid Gain Mode)

• Output Level (Vrms): 5.6Vrms @ 0dBFS
• THD+N @ No-wt: 0.00018% @ 1kHz (-115dB @ 1kHz)
• Noise @ No-wt: <2.5uVrms
• SNR @ A-wt: 126dB
• Frequency Response: 20Hz–20kHz (±0.1dB)
• DNR @ A-wt: 126dB

Headphone Audio Characteristics (High Gain Mode)

• Output Level (Vrms): 7Vrms @ 0dBFS
• THD+N @ No-wt: 0.00013% @ 1kHz (-118dB @ 1kHz)
• Noise @ No-wt: <2.5uVrms
• SNR @ A-wt: 127dB
• Frequency Response: 20Hz–20kHz (±0.1dB)
• DNR @ A-wt: 127dB

Power Supply : AC 100~240V 50/60Hz

USB Port : USB2.0*1（only for firmware upgrade）

Control Methods : Touchscreen control, remote control, mobile App control

Rated Power Consumption : 32W

Dimensions : 365mm (L) × 310mm (W) × 78mm (H)

Packing List

Remote control ×1, power cable ×1, USB data cable ×1, USB drive (for FW upgrade) ×1, TRIGGER cable ×1, polishing cloth ×1, user manual ×1