{"product_id":"emotiva-basx-pt1-stereo-preamp-dac-tuner","title":"Emotiva BasX PT1 Stereo Preamp\/DAC\/Tuner","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cdiv class=\"std\"\u003e\n\u003cp\u003eEmotiva BasX PT1 pre amplifier and DAC is an affordable hi-fi component, but quality is assured with the high quality circuit boards and DAC. Additionally, A wide range of inputs means you can connect everything from a turntable to a computer to a smartphone, via Bluetooth. Wi-fi is also included along with a bonus FM tuner.\u003c\/p\u003e\n\u003ch4\u003eHi-end DAC\u003c\/h4\u003e\n\u003cp\u003eThe DAC is one of the most important parts of any modern audio system and the PT1 Uses the renowned Analog Devices AD1955 24\/192k. The DAC or Digital to Analogue converter takes a digital signal and converts it back into an audio signal. For example on a CD the original audio was sampled at 22 Khz or 22,000 times a second. This is then cut into the surface of a CD as a series of pits. On playback a laser is focussed onto the disc producing a digital signal that has to be converted back into audio.\u003c\/p\u003e\n\u003ch4\u003eStereo preamp\u003c\/h4\u003e\n\u003cp\u003eThe stereo preamp uses hi-end fibre glass circuit boards with short signal paths to provide a clean sound. The output from a magnetic cartridge is only a few millivolts so good design is essential to prevent hum and noise. The BasX PT1 has a Phono preamp that can take moving magnet or moving coil cartridges. Analogue inputs are provided for CD and auxiliary.\u003c\/p\u003e\n\u003ch4\u003eUsability and Connectivity\u003c\/h4\u003e\n\u003cp\u003eThe front panel controls are all you need to use the PT1, however the provided remote control enable you to access the intuitive menu system making setting up the unit a breeze. As well as the analogue inputs there are digital input sockets for coaxial and optical. Additionally a USB socket is provided to connect your PC or MAC. There is an aptX HD capable Bluetooth receiver for streaming.\u003c\/p\u003e\n\u003ch4\u003eFM tuner and display\u003c\/h4\u003e\n\u003cp\u003eThe bonus FM tuner has 15 presets and can be controlled via the remote control. There is an FM aerial connection on the back of the unit. The bright but dimmable display tells you everything you need to know about the PT1s operation.\u003c\/p\u003e\n\u003ch4\u003eQuality circuit boards and layout\u003c\/h4\u003e\n\u003cp\u003eThe circuit boards of the Emotiva BasX PT1 are made of fibreglass, rather than the usual SRBP paper resin based boards. these are much more rigid and heat resistant, giving the unit a long life. Additionally,The case is made of steel with an aluminium front panel. The toroidal transformer used is more efficient and compact than traditional shell and core types.\u003c\/p\u003e\n\u003cdiv class=\"features\"\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty length\u003c\/th\u003e\n\u003ctd\u003e3 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eEmotiva\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tech\"\u003e\n\u003ch2\u003eTech Specs\u003c\/h2\u003e\n\u003cp\u003eAnalog Inputs\u003cbr\u003e- 2 pairs - stereo analog line level inputs (CD, Aux).\u003cbr\u003e- 1 pair - stereo phono inputs (switchable; moving magnet or moving coil).\u003cbr\u003e- Tuner - FM (with external antenna input; 15 station presets).\u003cbr\u003e\u003cbr\u003eDigital Inputs\u003cbr\u003e- 1 - digital coax (S\/PDIF); 24\/192k.\u003cbr\u003e- 1 - digital optical (Toslink); 24\/192k.\u003cbr\u003e- 1 - digital USB (DAC input); 24\/192k.\u003cbr\u003e- 1 - Bluetooth receiver (Bluetooth 5, with AptX, AptX HD, and AAC support, antenna included).\u003cbr\u003e\u003cbr\u003eOutputs\u003cbr\u003e- 1 pair - stereo full range main outputs.\u003cbr\u003e- 1 pair - stereo high-pass outputs; with fixed 90 Hz Linkwitz-Riley high-pass filter.\u003cbr\u003e- 1 - subwoofer output; with fixed 90 Hz Linkwitz-Riley low-pass filter.\u003cbr\u003e- 1 - high performance stereo headphone output.\u003cbr\u003e\u003cbr\u003eAnalog Performance (line level)\u003cbr\u003e- Maximum output level: 4 VRMS.\u003cbr\u003e- Frequency response: 5 Hz to 50 kHz +\/- 0.04 dB.\u003cbr\u003e- THD+noise: \u0026lt; 0.001% (A-weighted).\u003cbr\u003e- IMD: \u0026lt; 0.004% (SMPTE).\u003cbr\u003e- S\/N ratio: \u0026gt; 120 dB.\u003cbr\u003e- Crosstalk: \u0026lt; 90 dB.\u003cbr\u003e\u003cbr\u003eAnalog Performance (phono)\u003cbr\u003e- Frequency response (MM and MC): 20 Hz to 20 kHz; ref standard RIAA curve.\u003cbr\u003e- THD+noise: \u0026lt; 0.015% (MM; A-weighted); \u0026lt; 0.06% (MC; A-weighted).\u003cbr\u003e- S\/N ratio: \u0026gt; 78 dB (ref 5 mV; MM); \u0026gt; 58 dB (ref 0.5 mV; MC).\u003cbr\u003e- Gain (ref unity gain on main outputs at 1 kHz): 44 dB (MM); 55 dB (MC).\u003cbr\u003e\u003cbr\u003eAnalog Performance (headphone)\u003cbr\u003e- Power Output: 8 Ohms: 23 mW \/ channel. \u202833 Ohms: 90 mW \/ channel. 47 Ohms: 127 mW \/ channel. 150 Ohms: 145 mW \/ channel. 300 Ohms: 114 mW \/ channel. 600 Ohms: 75 mW \/ channel.\u003cbr\u003e\u003cbr\u003eDigital Performance\u003cbr\u003e- Frequency response: 5 Hz to 20 kHz +\/- 0.15 dB (44k sample rate). 5 Hz to 80 kHz +\/- 0.25 dB (192k sample rate).\u003cbr\u003e- THD+noise: \u0026lt; 0.003% (A-weighted; all sample rates).\u003cbr\u003e- IMD: \u0026lt; 0.007% (SMPTE).\u003cbr\u003e- S\/N ratio: \u0026gt; 110 dB ref rated output.\u003cbr\u003e\u003cbr\u003eTrigger\u003cbr\u003e- 12 VDC trigger output.\u003cbr\u003e\u003cbr\u003ePower Requirements\u003cbr\u003e- Universal SMPS which accepts anywhere between 100 VAC and 240 VAC.\u003cbr\u003e\u003cbr\u003eControls And Indicators\u003cbr\u003e- Power: rocker switch; rear panel.\u003cbr\u003e- Standby: one front panel push.\u003cbr\u003e- Two front panel pushbuttons: Input Select; menu operation.\u003cbr\u003e- One front panel knob: Volume; Tuning; menu operation.\u003cbr\u003e- Display: high visibility blue alphanumeric VFD display (dimmable).\u003cbr\u003e- Remote Control: compact full-function infrared remote control (AAA batteries required).\u003cbr\u003e- LEDs: amber Standby LED; blue illuminated legends for Input buttons and Headphone output.\u003cbr\u003e\u003cbr\u003eMechanical\u003cbr\u003e- Dimensions: 17” wide x 2-5\/8” high x 12-1\/2” deep (unboxed; without connectors). 21” long x 7” high x 17-1\/2” deep (boxed).\u003cbr\u003e- Weight: 9 lbs (unboxed). 14 lbs (boxed).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Emotiva","offers":[{"title":"Default Title","offer_id":57113591775605,"sku":null,"price":10816.0,"currency_code":"MXN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2222\/0805\/files\/basx_pt1_front_web_1.jpg?v=1777479252","url":"https:\/\/www.kronosav.com\/en-mx\/products\/emotiva-basx-pt1-stereo-preamp-dac-tuner","provider":"Kronos AV","version":"1.0","type":"link"}